每小時100-120噸處理量破碎制砂水洗設備、砂金設備工作現場

洗沙設備

【破碎制砂水洗設備、砂金設備流程概述】

原料通過工程車輛送入料倉，通過料斗底部懸掛式振動給料機均勻給料進入上料輸送機，由上料輸送機送入滾筒篩內進行篩選分級為：細料與粗料兩種規格：

粗料進入一臺反擊式制砂機內進行破碎；細料通過一條溜槽排入破碎機底部與破碎后的物料匯合，然后一起依次進入兩臺輪式洗砂機內進行二次清洗，清洗后的成品料由成品料輸送機輸送至成品料區域；

輪式洗砂機溢流口排出的廢水與細砂通過管道排入一料箱內，通過一臺沙泵打入細沙回收機內進行細砂回收與脫水，脫水后的細砂與成品料混合通過成品料輸送機輸送至成品料區域。

Technical process

Raw material get into feed hopper then into transport conveyor well distributed with work of vibration feeder,then into trommel screen to be classified into 2 size:the big(coarse) material and fine size material:

The big size one into one set of sand making machine(Impact type)to be crushing the crushed material with fine size material together into 2set of wheel bucket type sand washer for the 2nd time washing,then final production get and transported to destination by conveyor;

The fine sand discharged with scrap water into mineral box through the pipe by wheel bucket sand washer,then to be feed into fine sand recover machine by sand pump,the final production clean sand get and transported to destination by transport conveyor.

【破碎制砂水洗設備、砂金設備技術參數】
Detail parameter

名稱 Production Name	規格 Specification	數量 Quantity	功率 Power	單價 Unit price	總價 Total price	備注 Remark
料倉 Feed hopper	3000*2200	1套	0.37
上料輸送機 Transport conveyor	皮帶寬度800 約15米 Belt width 800m,length about 15m	1套	11
滾筒篩 Trommel screen	內徑1.3米，外徑1.6米，凈篩網長度3米 Inner diameter 1.3m,outer diameter 1.6m,screen mesh 3m	1套	11
輪式洗砂機 Wheel bucket sand washer	?2800*1800	2臺	7.5*2
細砂回收機 Fine sand recover machine	15002750 ; 2.2KW2 350#雙旋流器 6寸沙泵+22KW電機+泵箱 6inch sand pump+22motor+mineral box	1臺	26.4
成品料輸送機 Final production transport conveyor	皮帶寬度800mm，桿長15米 Belt width 800m,pole length about 15m	1套	11
制砂機 Impact sand making machine	800*1200	1臺	110
水泵 Water pump		1臺	7.5
配電箱 Electric box	含至設備電機線，不含變壓器至設備電纜線 Including the electric wire excluding the cable	1套	-
總功率 Total power	184.77KW