振動篩+固定溜槽+挖斗脫水機+臥式離心機

砂金提取方案

【沙金提取設備流程概述】

原料通過工程車輛送入進料斗內，通過高壓水沖洗后進入振動篩內進行篩選，分級為粗料、中等料與細料三種規格，其中不合格的粗料直接通過溜槽排入廢料池中；

合格的中等料通過兩條固定式淘金氈溜槽進行回收，廢料通過一臺挖斗式脫水機脫水后由輸送機傳出。

細料通過料斗下部的一臺8寸沙泵打入兩臺脫泥設備進行脫泥（可以防止泥漿在離心機內部離心力的作用下對金進行包裹形成泥球，極大的提高離心機回收率），脫泥后的細料排入料箱內通過沙泵打入兩臺1200#臥式全自動排礦離心機內進行精選，精選出的精料會自動排入精料箱內，廢料排入廢料池中，通過另一臺挖斗脫水機脫水后由輸送機輸送至指定區域。以上為砂金設備,砂金機械,沙金選礦設備,砂金設備配置,砂金提取設備選金流程。

Technical process

The raw material getting into feed hopper then into vibrating screen by swilling of high pressure water to be classified into 3size,the big size,the normal price, the small size,the one in big size useless is directly to get rid to scrap pool.

The one in normal size to be recovered by 2fixed gold sluice with carpet,the scrap material to be transported by conveyor after the bucket chain machine taking water off.

The one in small size get into desliming machine by pumping of 1set 8inch sand pump (it’s efficiently the recover of gold concentrator by preventing surface gold covered by the muddy mineral),then the clay-off mineral getting into 2set of horizontal gold concentrator to get concentrate into mineral box,the scrap into scrap pool which finally transported to destination by conveyor after the process of taking water off by buck chain machine.

【沙金提取設備技術參數】
Detail parameter and price

名稱 Production Name	規格 Specification	數量 Quantity	功率 Power	備注 Remark
進料斗 Feed hopper	4000*5000mm	1套	-
振動篩 Vibrating screen	2100*6000 雙層篩 2layer vibrating screen 上層篩：前三米為提油桿(防止砸壞篩網)，后三米為聚氨酯篩網。下層篩：聚氨酯篩網。 1st floor: top 3m with suck rod(to protect screen mesh),the other 3m with polyurethane screen mesh, The 2nd floor: with polyurethane screen mesh.	1套	18.5	含浮體、支架等 Including base plate,holding frames etc
脫泥設備 Desliming	1500*3500mm 0.55KW	2套	1.1
離心機 Gold concentrator	臥式全自動排礦 21.5KW Horizontal automatic discharge type	2套	43
固定溜槽 Fixed gold sluice	淘金氈溜槽 1000*6000mm With carpet	2套	-	含淘金氈 With gold carpet
挖斗脫水機 Bucket chain machine	60# 11KW	2套	22
沙泵&料箱 Sand pump and mineral box	8寸 8inch	1套	22
沙泵&料箱 Sand pump and mineral box	6寸 6inch	1套	15
輸送機 Transport conveyor	皮帶寬度600mm,桿長6米,3KW Belt width 600mm,pole length 6m,3KW	2套	6
離心泵 Centrifugal pump	11KW	1臺	11
水泵 Water pump	5.5KW	2臺	15
配電柜 Electric cabinet		1套	-
總功率 Total power	153.6KW